ITALIAN FINISHING TECHNOLOGY

Textile

Main layouts:

All foulards can be equipped with different accessories in order to comply their performances with all textile products in terms of rubber coatings, number and type of widener driven rollers, type of dancing roll, fabric path and so on.

Main layouts are as follows:

 

  • Cotton, woven fabrics and mixed
  • Knitted fabrics
  • Jersey fabrics
  • Elastic fabrics
  • Wool fabrics
  • Silk
  • Dyeing

Foulards / Padders

All BETA foulards are equipped with patented Beta-Rolls® (working pressure up to 100 N/mm) having rolls’ width up to 6.000 mm and with a 20-bar air compressor for rolls’ pressure system; all the machines can be provided with stainless steel frame.

 

  • No roll deflection under any working pressure
  • High squeezing efficiency (100 N/mm)
  • High squeezing load (up to 36 tons)
  • Rolls’ width up to 6.000 mm
  • Low operating costs
  • Great accessibility for maintenance, roll disassembling, cleaning and fabric threading

2-roll Foulard

3-roll Foulard

3-roll Differentiated Foulard

Supplied with two Beta-Rolls® (driven + idle)

 

Suited for dyeing, impregnation, standard squeezing

Supplied with two idle Beta-Rolls® and one small diameter central roll

 

Suited for high squeezing due to reduced contact area between small central roll and the Beta-Rolls® (version with one or two troughs for single or double nip, but always one working pressure)

Supplied with three Beta-Rolls® (one driven + two idle)

 

It’s like two machines in one. The two nips have two different selectable working pressures (independent from the other nip), two troughs

Calenders

2-roll Calender

3-roll Calender

Steel / Steel

 

 

Steel / Nylon

Nylon / Steel / Nylon

Small diameter steel central roll
for high squeezing, due to reduced
contact area between the central
roll and the large diameter Beta-Rolls®

 

Steel / Cotton / Steel

All BETA calenders for hot and cold treatment are equipped with our patented Beta-Rolls® (working pressure up to 300 N/mm) in chromium-plated and/or nylon covered versions with rolls’ width up to 4.000 mm, and with a 20-bar air compressor for rolls’ pressure system.

 

  • No roll deflection under any working pressure
  • High squeezing efficiency (300 N/mm)
  • High squeezing load (up to 90 tons)
  • Rolls’ width up to 4.000 mm
  • Oil-heated rolls up to 250° C
  • Temperature deviation on the roll table ± 1C°
  • Steel and nylon-coated rolls, engraved rolls
  • Low operating costs
  • Great accessibility for maintenance, cleaning, roll disassembling and fabric threading

Main layouts:

All the calenders listed before can be equipped with different accessories, type of Beta-Rolls® and working pressures in order to comply with all Customers’ needs. All steel rolls (both the Beta-Rolls® and the small diameter central rolls) can be provided in the hot version: the heating is obtained by means of diathermic oil circulation. Main layouts are as follows:

 

  • Hot version of Beta-Roll® with diathermic oil circulation
  • Cold version of Beta-Roll® with cooling liquid circulation
  • Cold version of Beta-Roll®
  • Cold version of Beta-Roll® covered with Nylon sleeve
  • Hot version of small diameter roll with diathermic oil circulation
  • Cold version of central small diameter roll

Rolls diameter

Rolls width

Max working pressure

300 mm

1600 mm / 2600 mm

18.000 kg

380 mm

1800 mm / 3600 mm

26.000 kg

450 mm

3000 mm / 5600 mm*

36.000 kg

* On request working widths over 5600 mm are available

Foulard Type

FL

FM

FP

Steel rolls diameter

Nylon rolls diameter

Rolls width

Max working pressure

500 mm

600 mm

1800 mm / 3600 mm

60.000 kg

600 mm

700 mm

2600 mm /  4000 mm*

90.000 kg

* On request working widths over 4000 mm are available

Calender Type

CP

CPS

Beta Machinery srl, ©2018 All rights reserved - VAT / P.IVA - IT-03172750121

Privacy Policy